After The Work - Canon Image Reader-A1 iR5000i Service Manual

CHAPTER 4 TROUBLESHOOTING IMAGE FAULTS/MALFUNCTIONS
9) Select the appropriate language and country from the [List of Software]; then, press
[Start] to start downloading.
10) See that the progress bar changes to indicate the progress of downloading work.
11) When downloading ends, turn off the PC by making the following selections:
OK>Return to PCB Select Menu>Return to Previous Screen>End.

7.3.3 After the Work

1) Turn off the main power switch of the host machine, and disconnect the power plug.
2) Turn off the PC.
3) Remove the parallel cable from the PC and the host machine.
4) If a network cable is used, connect it to the appropriate location; then, turn on the main
power switch of the host machine.
5) When the host machine has started up, start service mode, and check the system version
of the HDD by making the following selections:
COPIER>DISPLAY>VERSION>MN_CONT.
4-88 T
F04-703-08
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001