Pre-Exposure Lamp Unit; Removing The Pre-Exposure Lamp Unit - Canon Image Reader-A1 iR5000i Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM

7.1 Pre-Exposure Lamp Unit

7.1.1 Removing the Pre-Exposure Lamp Unit

1) Open the front cover, and slide out the
hopper unit to draw out the fixing/feed-
ing unit.
2) Take out the process unit. (See p. 4-
54P.)
3) Remove the primary charging assembly.
4) Remove the potential sensor unit.
5) Remove the two mounting screws [1],
and remove the potential sensor rail stay
[2].
6) Disconnect the connector [3], and re-
move the two mounting screws [4];
then, detach the pre-exposure lamp unit
[5].
4-50 P
COPYRIGHT © 2001 CANON INC.
[1]
F04-701-01
[3]
F04-701-02
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
[2]
[1]
[4]
[5]