Canon Image Reader-A1 iR5000i Service Manual page 529

3. Disassembly and Assembly
Be sure to observe the following when disassembling or assembling the machine:
1. Disconnect the power plug of the host machine before starting the work.
2. Unless otherwise noted, assemble the machine by reversing the steps used to disas-
semble it.
3. Identify the screws by type (length, diameter) and location.
4. Some mounting screws are equipped with a toothed washer to protect against static elec-
tricity. Be sure to use each washer.
5. As a rule, do not operate the machine while any of its parts are removed.
6. If the deck is equipped with a drier heater, be sure to disconnect the power plug of
the heater before starting the work.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 8 PAPER DECK
8-19 P