Adjusting The Leading Edge Non-Image Width - Canon Image Reader-A1 iR5000i Service Manual

CHAPTER 3 STANDARDS AND ADJUSTMENTS

1.6 Adjusting the Leading Edge Non-Image Width

1) Adjust the non-image width in service mode so that it is as indicated:
COPIER>ADJUST>ADJ-XY>ADJ-X.
3-6 T
Decreasing the ADJ-X setting
(A decrease by '10' will decrease the width by 1 mm.)
Increasing the ADJ-X setting
(An increase by '10' will increase the width by 1 mm.)
F03-106-01
COPYRIGHT © 2001 CANON INC.
Image leading edge
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001