Controlling The Developing Bias - Canon Image Reader-A1 iR5000i Service Manual

4.3 Controlling the Developing Bias

The system used to control the developing bias serves the following functions:
[1] Controlling the DC bias to a specific level of voltage.
[2] Controlling the AC bias to a specific level of voltage.
J102A
1
2
3
4
5
6
7
DEV-DC-CNT [1]
8
DEV-AC-REMOTE [2]
9
10
11
12
13
14
15
16
The following signals are used:
[1] developing DC bias current control signal; if about 3 V or higher and lower than 11 V,
the output of developing DC bias current turns ON; if about 12 V or higher, it turns
OFF.
[2] developing DC bias remote signal; turns on/off the output of developing DC bias cur-
rent.
COPYRIGHT © 2001 CANON INC.
J4502
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
F04-403-01
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 4 IMAGE FORMATION SYSTEM
AC output 1500Vpp
J4504
The developing DC bias varies as
follows in keeping with the potential
of DEV-DC-CNT.
600V
Image area
Non-image area
Developing cylinder
3V
11V 12V
DEV-DC-CNT
4-39 P