Removing The Differential Pcb - Canon Image Reader-A1 iR5000i Service Manual

6.3 Removing the Differential PCB

1) Remove the reader rear cover.
2) Remove the two mounting screws [1],
and detach the differential PCB mount-
ing plate [2].
3) Disconnect the connector [3], and re-
move the flat cable [4].
4) Remove the two mounting screws [5]
and two hex screws [6]; then, detach the
Differential PCB [7].
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 3 IMAGE PROCESSING SYSTEM
[1]
F03-603-01
[3]
F03-603-02
[7]
[6]
F03-603-03
[2]
[4]
[5]
3-15 R