Canon Image Reader-A1 iR5000i Service Manual page 305

4) If you have replaced the transfer charg-
ing wire or the transfer/separation
charging assembly be sure to execute
the following in service mode to clean
the wire:
COPIER>FUNCTION>CLEANING>
WIRE-CLN.
If you have replaced the separation
charging wire or the separation charging
assembly, be sure to execute 'wire
cleaning' in user mode. (If the surface
temperature of the fixing upper roller is
100°C or lower, you need not execute
this mode, as the wire will be cleaned
automatically.)
Further, be sure to use a
strengthened polishing pad
(blue holder) as the cleaning
pad.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 4 IMAGE FORMATION SYSTEM
4-65 P