Removing The Ethernet Pcb; Removing The Main Controller Pcb - Canon Image Reader-A1 iR5000i Service Manual

CHAPTER 7 EXTERNALS AND CONTROLS

5.4.3 Removing the Ethernet PCB

1) Remove the LIPS board, RISER board,
and differential PCB.
2) Remove the two mounting screws [1],
and detach the Ethernet PCB [2].

5.4.4 Removing the Main Controller PCB

1) Open the main controller box.
2) Remove the Ethernet PCB.
3) Remove the mounting screw [1], and
detach the PCB guide [2]. (1 pc. each;
upper, lower)
7-26 P
COPYRIGHT © 2001 CANON INC.
[1]
[2]
F07-504-09
[1]
[1]
F07-504-10
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
[2]
[2]