Sorter - Canon Image Reader-A1 iR5000i Service Manual

CHAPTER 5 SERVICE MODE

4.3 SORTER

PNCH-HLE
Use it to adjust the position of the punch holes (paper feeding direction)
when the puncher unit is used.
• A higher setting moves the punch holes toward the leading edge
Range of -4 to +2 (unit; mm)
adjustment
Using the Mode
1) Make a print of the Test Chart, and check the position of the holes.
2) Select this item, and change the setting as needed.
3) Press the OK key.
4) Make a print of the Test Chart once again, and see that the position for
the holes is as indicated.
5-58 T
(middle) of the sheet.
Feeding direction
COPYRIGHT © 2001 CANON INC.
Paper
Higher setting Lower setting
F05-403-01
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
SORTER>ADJUST