Orientation Of The Feeding Roller Of The Deck/Cassette Pickup Assembly; Removing The Separation Roller - Canon Image Reader-A1 iR5000i Service Manual

Photocopy machines
Hide thumbs Also See for Image Reader-A1 iR5000i:
Table of Contents

Advertisement

9.2.7 Orientation of the Feeding Roller of the Deck/Cassette Pickup As-
sembly
When mounting the feeding roller assem-
bly [1] to the cassette pickup assembly, be
sure that the belt pulley [2] is at the front of
the machine.
Check to make sure that the
protrusion in the roller plate and
the roller are engaged securely.

9.2.8 Removing the Separation Roller

1) Remove the two mounting screws [1],
and detach the feed guide plate [2];
then, detach the open/close guide [3].
(Skip this step for the left deck pickup
assembly.)
2) Remove the two mounting screws [4],
and detach the separation roller assem-
bly [5] form the joint.
(For the left deck pickup assembly, re-
move one screw [6].)
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 5 PICK UP/FEEDING SYSTEM
(front)
[2]
F05-902-09
[2]
[1]
F05-902-10
Cassette 3/4
Right deck pickup assembly
[4]
Left deck pickup assembly
[5]
F05-902-11
[1]
(rear)
[3] [1]
[5]
[4]
[6]
5-57 P

Advertisement

Table of Contents
loading

Table of Contents