Soft Counter - Canon imageRUNNER ADVANCE 6575i Service Manual

Canon
Q.

Soft Counter

The imageRUNNER ADVANCE 6500 Series uses soft counters to track its
functional copy use. The control panel can display up to eight (8) counters on
the counter status check screen (when the counter check key button on the
control panel is pressed). By default, the imageRUNNER ADVANCE 6500
displays six (6) counters on the counter status check screen.
The Table below indicates the default counter configurations of the
imageRUNNER ADVANCE 6500 Series on the counter status check screen.
Refer to the imageRUNNER ADVANCE 6500 Series Service Manual for
complete details on the Soft Counter configurations.
Table 28 – Soft Counter
Counter
1
2
3
4
5
6
CAUTION
•
After performing a RAM clear, the counter will change to the default
counter configurations above. As a result, the service technician must
note the current soft counter settings before performing the RAM clear
and return the soft counter settings after performing the RAM clear.
•
If Counter 1 is changed to display the 102 counter (count two (2) clicks
for large paper), Counter 2 may need to be changed to display the 109
counter (count two (2) clicks for large B&W paper) to match. However,
you may need to confirm how your backend billing system and service
history obtains the volume of color outputs before making this change.
Canon imageRUNNER ADVANCE 6575i/6565i/6555i Service Guide
Revision1
Canon imageRUNNER ADVANCE 6575i/6565i/6555i Service Guide
Counter Description
(from Service Manual)
101: Total 1
103: Total (Large)
201: Copy (Total 1)
203: Copy (Large)
Not Displayed
Not Displayed
Default
Adjustability of Display
Display
May be Swapped to different
Total Counter via Service
On Mode setting so that the
counter will increment twice
when large paper is used
On
On
May be Changed via Service
On Mode setting to any
available counter
On
On
February 2016
Page 64