Canon Image Reader-A1 iR5000i Service Manual page 541

3.3 Drive Mechanisms
3.3.1 Removing the Deck Pickup Clutch (CL102)
1) Remove the deck pickup unit. (See p. 8-
38P.)
2) Disconnect the connector [1], and re-
move the E-ring [2]; then, remove the
deck pickup clutch [3].
When mounting the pickup
clutch, be sure to engage the
clutch with the stop ring [4]. In
addition, be sure to hook the
harness on the U-groove [5] of
the guide.
3.3.2 Removing the Deck Main Motor (M101)
1) Disconnect the deck from its host ma-
chine, and remove the six screws; then,
detach the rear cover.
2) Disconnect the connector [1], and re-
move the two screws [2]; then, remove
the deck main motor. At this time, take
care not to damage the gear found at the
tip of the motor spindle.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 8 PAPER DECK
[1]
[3]
[4]
F08-303-01
[2]
[1]
F08-303-02
[2]
[5]
[3]
[2]
8-31 P