Canon Image Reader-A1 iR5000i Service Manual page 839

PWD-CLR
Use it to clear the password set for 'system administrator' in user mode.
Using the Mode
1) Select the mode item, and press the OK key.
2) Turn off and then on the main power switch.
ADRS-BK
Initializing the Address Book Data
1) Select the item, and press the OK key.
2) Turn off and then on the main power switch.
CNT-MCON
Use it to clear the counter for servicing located on the main controller PCB.
Using the Mode
1) Select the mode item, and press the OK key.
2) Turn off and then on the main power switch.
CNT-DCON
Use it to clear the counter for servicing found on the DC controller PCB.
Using the Mode
1) Select the mode item, and press the OK key.
2) Turn off and then on the main power switch.
MMI
Use it to clear the backup data on user mode settings (spec, ID, group ID,
mode memory, etc.).
Using the Mode
1) Select the mode item, and press the OK key.
2) Turn off and then on the main power switch.
CARD
Clearing Data Related to the Card ID (group ID)
1) Select the item, and press the OK key.
2) Turn off and then on the main power switch.
At this time, error code 'E719' will be indicated. Clear the error indication
in service mode: FUNCTION>CLEAR>ERR; then, turn off and then on the
main power switch.
ALARM
Clearing the Alarm Log
1) Select the item, and press the OK key.
2) Turn off and then on the main power switch.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
CHAPTER 5 SERVICE MODE
COPIER>FUNCTION
5-73 T