Adjusting The Position Of The Fixing Web Solenoid (Sl9); New Fixing Web; Existing Fixing Web - Canon Image Reader-A1 iR5000i Service Manual

4.14 Adjusting the Position of the Fixing Web Solenoid (SL9)

4.14.1 New Fixing Web

Adjust the position for the solenoid using the screw [2] so that the distance of travel of the
drive lever [1] is 8.6 mm.

4.14.2 Existing Fixing Web

Before removing the solenoid, take note of the position [A] of the drive lever when the
solenoid turns on. After replacing the solenoid, adjust its position using the screw [2] so that
the drive lever [1] will be positioned as it was before replacement when the solenoid turns
on.
COPYRIGHT © 2001 CANON INC.
CHAPTER 3 STANDARDS AND ADJUSTMENTS
[2]
F03-414-01
[2]
F03-414-02
2000 2000 2000 2000 CANON iR5000i/iR6000i REV.0 JUNE 2001
[1]
8.6mm
[1]
A
3-19 T