Reboot - Allied Telesis x310-26FT Command Reference Manual

S C M
YSTEM ONFIGURATION AND

REBOOT

reboot
Overview This command halts the device and performs a cold restart (also known as reload).
It displays a confirmation request before restarting.
You can reboot a stand-alone device, a stack, or a specified stack member.
Syntax reboot <stack-ID>
reload <stack-ID>
reboot
reload
Mode Privileged Exec
Usage The reboot and reload commands perform the same action.
When restarting the whole stack, you can either use this reboot command to
reboot all stack members immediately, or to minimize downtime, reboot the stack
members in a rolling sequence by using the
Examples To restart a stand-alone device, use the command:
awplus#
reboot system? (y/n):
To restart all devices in a stack, use the command:
awplus#
Are you sure you want to reboot the whole
stack? (y/n):
To restart stack member 2, use the command:
awplus#
reboot stack-member 2 system? (y/n):
If the specified stack member ID does not exist in the current stack, the command
is rejected.
Related reboot rolling
Commands
reload rolling
C613-50103-01 REV A
C
ONITORING OMMANDS
Parameter Description
<stack-ID>
Stack member number, from 1 to 8.
reboot
reboot
y
reboot stack-member 2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
reboot rolling
y
y
command.
236