Findme Trigger - Allied Telesis x310-26FT Command Reference Manual

S C M
YSTEM ONFIGURATION AND

FINDME TRIGGER

findme trigger
Overview When this command is enabled, the LED flashing functionality of the find-me
command is applied whenever any or all of the selected parameter conditions is
detected.
Use the no variant to remove the findme trigger function for the selected
parameter.
findme trigger {all|loopprot|thrash-limit|qsp}
Syntax
no findme trigger {all|loopprot|thrash-limit|qsp}
Default The findme trigger function is disabled.
Mode Global config
Example To enable action LED flashing for the loop protection function:
awplus#
Related findme
Commands
loop-protection loop-detect
storm-protection
C613-50103-01 REV A
C
ONITORING OMMANDS
Parameter Description
all
Enable the find-me function whenever any of the listed parameter
conditions is detected
loopprot
Enable the findme function whenever
the loop protection condition is detected.
thrash-limit
Enable the findme function whenever
the thrash-limiting condition is detected.
qsp
Enable the findme function whenever
the QoS Storm Protection condition is detected.
findme trigger loopprot
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
230