Engine Cover Removal; Installation - TOHATSU BFT75A Service Manual

dummyhead dummyhead

ENGINE COVER REMOVAL/

INSTALLATION

REMOVAL
Unlock the locks on the front and rear sides of the engine cover and remove the engine cover.
ENGINE COVER
ENGINE COVER SEAL
INSTALLATION
Apply glue (LOCTITE
cover seal [1] at the points shown.
• Note that the application points for the glue agent on
the inner side and outer side of the engine cover
seal are different.
Install the engine cover seal on the engine cover.
Set the engine cover on the outboard motor, and lock
the engine cover on the front and rear sides.
®
460 or equivalent) to the engine
ENGINE COVER
®
Glue (LOCTITE 460 or equivalent)
Application points (Outer side: At 8 points)
®
Glue (LOCTITE 460 or equivalent)
Application points (Inner side: Circumference)
[1]
Inner side:
Outer side:
6-3