TOHATSU BFT75A Service Manual page 561

dummyhead dummyhead
CONTROLS
Remove the harness band clip [1] that clamps the cord
tube (40 mm) [2] from the connector bracket [3] as
shown.
Remove the switch clip [1] from the emergency stop
switch [2].
Remove the nut [3] from the emergency stop switch,
and push the emergency stop switch into the housing.
Remove the nut [4] from the combination switch, and
push the combination switch [5] into the housing.
19-24
[2]
[3]
[2]
[4] [5]
[1]
[3]
[1]