dummyhead
dummyhead
Remove the seven bolts (8 X 100 mm) [1] and three
bolts (8 X 120 mm) [2] from the underside of the mount
case [3].
Pull the engine [4] up slowly, and remove it from the
mount case.
• Be sure that the engine hanger (commercially
available: VSB02C000021) hooks [5] are set on the
two engine hangers securely.
• Hold the engine level while pulling it up.
Remove the two dowel pins [6] and mount case gasket
[7] from the mount case.
[5]
[6]
[2]
ENGINE REMOVAL/INSTALLATION
[4]
[7]
[3]
[1]
13-7