Fuel Tank/Fuel Tank Tube Disassembly/Assembly - TOHATSU BFT75A Service Manual

dummyhead dummyhead
FUEL SYSTEM
FUEL TANK/FUEL TANK TUBE
DISASSEMBLY/ASSEMBLY
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
• Keep heat, sparks, and flame away.
• Wipe up spills immediately.
• Handle fuel only outdoors.
DISASSEMBLY
FUEL TUBE JOINT
TUBE CLIP BAND
(12.5 mm)
INLET VALVE
FUEL TANK FILTER
FUEL TUBE (LONG)
TUBE CLIP BAND
(12.5 mm)
FUEL CONNECTOR
ASSEMBLY
Install the inlet valve [1] [has the pin [2]] at the side not
marked with " " mark [3] on the primer bulb [4].
Install the outlet valve [5] at the side marked with the
" " mark.
• Do not confuse the inlet valve and the outlet valve
• Install the priming bulb with the " " mark toward the
motor side
Assembly of the other parts is in the reverse order of
disassembly.
5-96
FUEL TUBE (SHORT)
FUEL JOINT
FILTER GASKET
TUBE CLIP
BANDS (12.5 mm)
TUBE CLIP
BANDS (20 mm)
PRIMER BULB
SCREW (5 mm) (4)
FUEL TANK CAP
TANK CAP PACKING
PRESSURE RELIEF
RETAINER
FUEL STRAINER
[2]
[2]
[1]
Fuel tank side
OUTLET VALVE
TUBE CLIP BAND
(12.5 mm)
FUEL TANK
[5]
[4]
Motor side
[3]