TOHATSU BFT75A Service Manual page 501

dummyhead dummyhead
TRIM/TILT
Apply marine grease to the circumference of the swivel
case liners [1].
Install the swivel case liners by aligning the projection
[2] on each swivel case liner with the recess [3] in the
swivel case.
Apply marine grease to the circumference of a new oil
seal [1].
Install the oil seal in the bottom of the swivel case using
the special tool. Note the installation direction of the oil
seal.
TOOL:
Driver [2]
Attachment, 52 X 55 mm [3]
Apply marine grease to the lip of the oil seal.
18-20
[2]
[1]
[3]
07749-0010000
07746-0010400
[1]
[3]
[1]
[2]
[2]
[3]