TOHATSU BFT75A Service Manual page 139

dummyhead dummyhead
TROUBLESHOOTING
4. Overheat inspection
Check the motor for overheating.
Is the motor overheated?
YES
NO
5. Power tilt motor continuity inspection
Check for continuity at the motor (page 18-46).
Is there continuity?
YES
NO
6. Breaker inspection
Check the breaker inside the motor (page 18-46).
Is the breaker normal?
YES
NO
7. Oil leak inspection
Check for oil inside the motor.
Is oil inside?
YES
NO
GAS ASSISTED DAMPER TILT-UP LOAD IS HEAVY (LHGX TYPE ONLY)
1. Gas assisted damper stick inspection.
Check the damper stick.
Is it stuck from corrosion?
YES
NO
GAS ASSISTED DAMPER DOES NOT HOLD IN POSITION (LHGX TYPE ONLY)
1. Tilt lever inspection.
Check the tilt lever position.
Position of the tilt lever is "LOCK"?
YES
NO
4-26
– Cool down the motor.
– GO TO STEP 5.
– GO TO STEP 6.
– Repair or replace the motor.
– GO TO STEP 7.
– Replace the front bracket.
– Replace the motor (page 18-23).
– Disassemble the motor and replace the faulty part (page 18-41).
– Replace the damper stick.
– Replace the gas assisted damper (page 18-48).
– Replace the gas assisted damper (page 18-48).
– Move the tilt lever to the "LOCK" position.