TOHATSU BFT75A Service Manual page 218

dummyhead dummyhead
Release the water level sensor 2P connector [1] and
the trim angle sensor 3P connector [2] from the relay
bracket and remove the harness band clip [3] from the
relay bracket.
Remove the hose clip [4] from the fuel hose and fuel
tube B.
Disconnect air vent tube A [1] and fuel tube D [2] from
the vapor separator.
Open the fuel hose grommet [1] and release the fuel
hose [2].
Release fuel tube B [3] from the two fuel tube clamp Bs
[4].
Release fuel tube C from the tube clamp [5].
Release water tube A [1] and B [2] from the Water
jacket cover.
[3]
[4]
[1]
[4]
[3]
[1]
[2]
[1]
FUEL SYSTEM
[1]
[2]
[2]
[5]
[2]
5-77