Pre-Operation Checks; Engine Cover Removal/Installation - TOHATSU BFT 2000A Owner's Manual

BFT200A/BFT225A is 4-stroke,
water cooled outboard motor which
uses unleaded regular gasoline for
fuel. It also requires the engine oil.
Check the following before operating
the outboard motor.
Perform the following
pre-operation checks with the
engine stopped.
Before each use, look around and
underneath the engine for signs of oil
or gasoline leaks.

Engine Cover Removal/Installation

<Removal>
ENGINE COVER LATCH
1. Pull the engine cover latch.
2. Remove the engine cover by taking
it up.

6. PRE-OPERATION CHECKS

<Installation>
COVER SIDE
1. Place the engine cover on the main
body.
2. Slide the engine cover so that the
cover lock on the cover is mated
with the lock in the main body.
COVER LOCKS
MAIN BODY SIDE
39