TOHATSU BFT75A Service Manual page 69

dummyhead dummyhead
SERVICE INFORMATION
TUBE CLAMP 7.5 - 11.5
Install fuel tube C into the large clamp, and check
valve tube B into the small clamp with the openings of
the clamp facing the cylinder block side.
PAINT MARK
TUBE CLAMP 7.5 - 11.5
MAIN HARNESS
FUEL TUBE
CLAMP A
AIR VENT TUBE A
FUEL TUBE D
Install into the clamp
under the intake manifold.
FUEL TUBE B
FUEL TUBE CLAMP B
Install with the opening
facing up and align the edge
with the protector tube end
of fuel tube B.
2-50
FUEL
TUBE C
FUEL TUBE C
TUBE CLAMP
Install fuel tube C and
air vent tube C with the
openings of the clamp
facing up.
CHECK VALVE
FUEL STRAINER
TUBE B
(LOW)
FUEL TUBE CLAMP B (2)
Install with the opening
facing the fuel line side
and align the upper edge
with the paint mark.
AIR VENT TUBE C
HOSE CLIP
TUBE
(7.3 x 90 mm)
FUEL TUBE
CLAMP A
PAINT MARKS
FUEL TUBE
CLAMP B