TOHATSU BFT75A Service Manual page 65

dummyhead dummyhead
SERVICE INFORMATION
FUEL TUBE A
FUEL TUBE B
WATER LEVEL SENSOR/
WATER SEPARATOR
2-46
TUBE CLIP D10.7
PRESSURE REGULATOR
CONTROL TUBE
WIRE CLAMP
• Install the pump harness into the upper side of
the clamp, and set the clamp so that the
opening is facing the crankcase side.
• Install the pressure regulator return hose into
the lower side of the clamp, and set the clamp
so the opening is facing the crankcase side.
PUMP WIRE
HARNESS
PRESSURE REGULATOR
PRESSURE REGULATOR
RETURN HOSE
TUBE CLIP
D10.7
PUMP CASE