Piping Connections - TOHATSU BFT75A Service Manual

dummyhead dummyhead
FINAL PROCEDURE (AFTER
TROUBLESHOOTING)
Clear the DTCs.
• DTC (with the Dr.H: page 5-5)
• MIL (without the Dr.H: page 5-5)
Disconnect the SCS service check connector or Dr.H
from the DLC and connect the dummy connector.

PIPING CONNECTIONS

[1] Vapor separator
[2] Fuel pump (High pressure side)
[3] Fuel strainer (High pressure side)
[4] Pressure regulator
[5] Air vent strainer
[6] Check valve
[7] Breather tube
[8] Silencer case
[1]
[15]
[14]
[12]
[13]
[6]
[5]
[4]
[3]
[2]
[10]
[11]
[9] TP sensor
[10] MAP sensor
[11] IAC valve
[12] Injector
[13] Water separator
[14] Fuel strainer (Low pressure side)
[15] Fuel pump (Low pressure side)
FUEL SYSTEM
[9]
[7]
[8]
5-7