TOHATSU BFT75A Service Manual page 55

dummyhead dummyhead
SERVICE INFORMATION
CLAMP
2-36
LUG
LUG
LUG
GROUND CABLE
• Install with the Black and Blue terminal
onto the upper side, and the Black
terminals onto the lower side.
• Tighten the bolt while pushing the ground
terminal against the lug on the cylinder
block.
STATOR HARNESS
Set into the clamp and above the
lug of the electronic parts case.
LUG
STARTER CABLE (–)
Tighten the bolt while pushing the
cable terminal against the lug of
the cylinder block.
ELECTRONIC
PARTS CASE