TOHATSU BFT75A Service Manual page 542

dummyhead dummyhead
INSTALLATION
Set the starter cable [1] on the front bracket [2].
• Align the tape end [3] on he starter cable with the
end of the front bracket.
Remote control type:
Route the starter cable [1], fuel tube [2], 14P connector
wire harness [3], and 6P connector wire harness [4]
through the cable grommet [5].
• Align the tie wrap band [6] on each of the 14P
connector wire harness and 6P connector wire
harness with the end of the cable grommet.
[3]
[1]
[4]
[3]
[6]
CONTROLS
[3]
[1]
[2]
[5]
[4]
[2]
[6]
[5]
19-5