TOHATSU BFT75A Service Manual page 366

dummyhead dummyhead
Remove the bolt [1], oil pipe [2], and O-ring [3].
Remove the cam chain [4].
Loosen the bolt/washer [1] while holding the camshaft
with a 30 mm open end wrench as shown.
Remove the bolt/washer [1], and remove the cam chain
driven sprocket [2] from the camshaft.
Remove the cam chain drive sprocket [1] and the
special key [2] from the crankshaft.
CYLINDER HEAD
[1]
[2]
[4]
[1]
[2]
[2]
[3]
[1]
[1]
14-7