dummyhead
dummyhead
REMOTE CONTROL CABLE
or TILLER HANDLE 14P
CONNECTOR
INDICATOR LIGHT
6P CONNECTOR
WIRE CLAMPER
Set the pump harness
above the power tilt
relay 3P connector
wire (Except LHGX
type).
FUEL PUMP (HIGH)
2P CONNECTOR
MAIN
POWER TILT RELAY
HARNESS
3P CONNECTOR
(Except LHGX type)
SERVICE INFORMATION
WIRE CLAMP
• Install the pump harness into the
upper side of the clamp, and set the
clamp so that the opening is facing
the crankcase side.
• Install the pressure regulator return
hose into the lower side of the clamp,
and set the clamp so the opening is
facing the crankcase side.
POWER TILT RELAY 3P
CONNECTOR WIRE
PUMP
HARNESS
PRESSURE
REGULATOR
RETURN HOSE
PUMP CASE
2-19