TOHATSU BFT75A Service Manual page 543

dummyhead dummyhead
CONTROLS
Long tiller handle type:
Route the starter cable [1], fuel tube [2], and 14P/6P
connector wire harness [3] through the cable grommet
[4].
• Align the tape [5] on the 14P/6P connector wire
harness with the end of the cable grommet.
Install the cable grommet [1] in the groove in the front
bracket [2], aligning the flat part [3] of the front bracket
with the flat part [4] of the cable grommet.
19-6
[3]
[1]
[3]
[1]
[2]
[3]
[4]
[2]
[5]
[4]
[4]