TOHATSU BFT75A Service Manual page 351

dummyhead dummyhead
ENGINE REMOVAL/INSTALLATION
Open the hose grommet [1] and release the fuel hose
[2].
Release fuel tube B [3] from the two fuel tube clamp Bs
[4].
Release fuel tube C from the tube clamp [5].
Disconnect air vent tube A [1] and fuel tube D [2] from
the vapor separator.
Disconnect air vent tube C [1] from the mount case.
Disconnect water tube A [2] and water tube B [3].
Remove the three bolt/washers [1] and pull the vapor
separator [2].
13-4
[4]
[3]
[1]
[1]
[1]
[3]
[2]
[1]
[5]
[2]
[2]
[1]
[2]