Warning Buzzer Inspection; Emergency Stop Switch; Inspection - TOHATSU BFT75A Service Manual

dummyhead dummyhead
CONTROLS

WARNING BUZZER INSPECTION

• Use a known-good battery for the test.
Connect the Black/Yellow terminal of the warning
buzzer to the positive (+) terminal of the 12 V battery
and the Yellow/Green terminal to the negative (–)
terminal of the battery. The warning buzzer should
sound.

EMERGENCY STOP SWITCH

INSPECTION

Attach the tester leads [1] to the two terminals of the
emergency stop switch [2] and check for continuity.
Switch clip position
Switch clip set
Switch clip not set
Switch clip set and switch pushed
19-46
[1]
Continuity
No
Yes
Yes
Black/Red
<Tiller handle type>
Black
Switch clip set and
switch pushed.
Black/
Yellow/
Yellow Green
12V
<Remote control type>
Black
Black/Red
Switch clip not set.
[2]