TOHATSU BFT75A Service Manual page 42

dummyhead dummyhead
HARNESS
BAND CLIP
REMOTE CONTROL CABLE
or TILLER HANDLE 14P
CONNECTOR
INDICATOR LIGHT
6P CONNECTOR
HARNESS
BAND CLIP
FUSE CABLE 1P
CONNECTOR
HARNESS BAND CLIP
Clamp the remote control
cable harness or tiller
handle cable harness, and
indicator light harness.
NEUTRAL SWITCH 2P
CONNECTOR
FUSE CABLE 1P
CONNECTOR WIRE
(Except LHGX type)
FUEL PUMP (HIGH)
2P CONNECTOR
MAIN HARNESS
POWER TILT
RELAY
(Except LHGX type)
POWER TILT RELAY
2P CONNECTOR
(Except LHGX type)
HARNESS
BAND CLIP
SERVICE INFORMATION
POWER TILT RELAY
3P CONNECTOR
(Except LHGX type)
HARNESS
BAND CLIP
HARNESS
BAND CLIP
POWER TILT RELAY
1P CONNECTOR
(Except LHGX type)
POWER TILT MOTOR
2P CONNECTOR
(Except LHGX type)
WIRE CLAMPER
Set the pump harness
above the power tilt
relay 3P connector wire
(Except LHGX type).
PUMP HARNESS
POWER TILT
RELAY 1P
CONNECTOR WIRE
(Except LHGX type)
POWER TILT RELAY 3P
CONNECTOR WIRE
(Except LHGX type)
POWER TILT
RELAY GROUND
CABLE
(Except LHGX type)
(Except LHGX type)
Tighten the bolt while
pushing the ground
terminal against the lug
on the crankcase.
LUG
2-23