TOHATSU BFT75A Service Manual page 47

dummyhead dummyhead
SERVICE INFORMATION
FUEL TUBE C
PAINT MARK
TUBE CLAMP 7.5 - 11.5
• Set the small clamp onto the main harness with
the opening facing the cylinder block.
• Set the large clamp onto fuel tube C with the
opening facing the cylinder block.
• Set by aligning the upper edge with the paint
mark on fuel tube C.
2-28
FUEL TUBE CLAMP A
• Set with fuel tube D positioned in front of the main harness.
• Set with the openings facing the fuel line side.
• Set by aligning the upper edge with the paint mark on fuel tube D.
FUEL TUBE D
PAINT MARK
TUBE CLAMP
7.5 - 11.5
FUEL TUBE C
MAIN HARNESS
HARNESS
BAND CLIP
MAIN HARNESS
FUEL TUBE CLAMP
BRACKET
PAINT MARK
No.1 FUEL
INJECTOR 2P
CONNECTOR
No.2 FUEL
INJECTOR 2P
CONNECTOR
No.3 FUEL
INJECTOR 2P
CONNECTOR
No.4 FUEL
INJECTOR 2P
CONNECTOR
PAINT MARK
FUEL TUBE
CLAMP A
MAIN HARNESS
FUEL
TUBE D
HARNESS
BAND CLIP