Installation - TOHATSU BFT75A Service Manual

4 stroke outboard motor

Hide thumbs Also See for BFT75A:

Table of Contents

PROPELLER REMOVAL/INSTALLATION

(Spline and threads)

PROPELLER THRUST WASHER

INSTALLATION:

Install the thrust washer in the direction as

3-BLADE PROPELLER

(Optional part)

WASHER (18.5 mm)

SPLIT PIN (4.0 mm)

INSTALLATION:

Be sure to use a Honda Genuine

part (stainless steel).

Bend the pin ends as shown to

secure the nut.

SPLIT PIN (4.0 mm)

PROPELLER CASTLE NUT (18 mm)

1 N·m (0.10 kgf·m, 0.7 lbf·ft)

Tighten the castle nut to the specified

torque. If the split pin cannot be set,

tighten the nut additionally until the split

pin can be set.

MAX. TORQUE:

44.1 N·m (4.5 kgf·m, 33 lbf·ft)

Table of Contents