TOHATSU BFT75A Service Manual page 70

dummyhead dummyhead
FUEL TUBE
BRACKET
FUEL TUBE
CLAMP B
AIR VENT
TUBE A
PAINT MARKS
FUEL TUBE CLAMP A
Install with the openings
facing up and align the left
edge with the right edge of
the paint marks.
HOSE CLIP
• Install fuel tube D into the inside clip with
the opening of the clip facing up.
• Install fuel tube C into the outside clip
with the opening of the clip facing the
fuel line side.
AIR VENT
TUBE B
FUEL TUBE C
FUEL TUBE D
SERVICE INFORMATION
FUEL TUBE CLAMP B
Install with the opening
facing the fuel line side.
AIR VENT
STRAINER
AIR VENT
TUBE C
PAINT MARK
FUEL TUBE CLAMP B
Install with the opening
facing as shown and align
the upper edge with the
paint mark.
FUEL TUBE CLAMP B
Install with the opening
facing the fuel tube C side.
2-51