TOHATSU BFT75A Service Manual page 455

dummyhead dummyhead
GEAR CASE
Set a commercially available universal bearing puller [1]
between the taper bearing (inner race) and forward
bevel gear.
Drive the taper bearing (inner race) out of the forward
bevel gear using the special tools and a hydraulic press
as shown.
TOOLS:
Driver [2]
Attachment, 42 x 47 mm [3]
Pilot, 25 mm [4]
Remove the taper bearing (outer race) [1] using the
special tool as shown.
Replace the taper bearing (outer race) and the inner
race with new ones as a set on assembly.
TOOLS:
Bearing race puller [2]
Remover handle [3]
Remover weight [4]
Remove the forward bevel gear shim [5] from the gear
case.
Replace the shim with a new one on assembly.
16-26
07749-0010000
07746-0010300
07746-0040600
[3]
07LPC-ZV30101
07936-3710100
07936-371020A
[2]
[4]
[2]
[4]
[5]
[3]
[1]
[1]