Pre-Operation Checks; Engine Cover Removal/Installation - TOHATSU BFT 250A Owner's Manual
Hide thumbs
Also See for BFT 250A:
- Owner's manual (128 pages) ,
- Service manual (639 pages) ,
- Manual (43 pages)
Table of Contents
Advertisement
BFT250A is 4-stroke, water cooled
outboard motor which uses unleaded
regular gasoline for fuel. It also
requires the engine oil. Check the
following before operating the
outboard motor.
Perform the following
pre-operation checks with the
engine stopped.
Before each use, look around and
underneath the engine for signs of oil
or gasoline leaks.
Engine Cover Removal/Installation
<Removal>
ENGINE COVER LATCH
1. Pull the engine cover latch.
2. Remove the engine cover by taking
it up.
6. PRE-OPERATION CHECKS
<Installation>
COVER SIDE
1. Place the engine cover on the main
body.
2. Slide the engine cover so that the
cover lock on the cover is mated
with the lock in the main body.
COVER LOCKS
MAIN BODY SIDE
39
Advertisement
Table of Contents
