Power Tilt Relay Inspection - TOHATSU BFT75A Service Manual

dummyhead dummyhead

POWER TILT RELAY INSPECTION

• Remove the power tilt relay before inspection.
Check for continuity between the following terminals.
Between Green and Black
Between Blue and Black
Between Green and White
Between Blue and White
Connect a battery as shown. There must be continuity/
no continuity between the terminals shown.
• Use a known-good battery for the test.
Positive (+) battery terminal connected to Light
green terminal:
Between Green and Black
Between Blue and Black
Between Green and White
Between Blue and White
Positive (+) battery terminal connected to Light blue
terminal:
Between Green and Black
Between Blue and Black
Between Green and White
Between Blue and White
If above inspection is abnormal, replace the power tilt
relay.
Continuity
Continuity
No continuity
No continuity
Bu
No continuity
Continuity
Continuity
No continuity
Continuity
No continuity
No continuity
Continuity
OTHER ELECTRICAL
POWER TILT RELAY
G
W
G
Bl
Bu W
Bl
Lb
Lg
Lb
Lg
10-15