Pin Check; Anode Metal Check (Outer Side) - TOHATSU BFT75A Service Manual

dummyhead dummyhead
PROPELLER AND SPLIT PIN CHECK
Check the propeller [1] for bending or damage.
Make sure the split pin [2] ends are bent as shown to
lock the castle nut [3].
Replace the propeller or split pin, if necessary.

ANODE METAL CHECK (OUTER SIDE)

GEAR CASE
Check the anode metal [1] for excessive wear or
corrosion.
Replace the anode with a new one if it is corroded
excessively (page 16-4).
MAINTENANCE
[3]
[1]
[2]
[1]
3-17