TOHATSU BFT75A Service Manual page 235

dummyhead dummyhead
FUEL SYSTEM
Install the pump harness [1] on the pump cover [2], and
install the screw [3] and washer [4].
Tighten the screw to the specified torque.
TORQUE:
Set each wire in the respective recess [1] in the holder,
and set the Blue/Yellow terminal [2] and Black terminal
[3] in the positions shown.
Set the holder in the pump cover.
Set the wires between the projections [4] on the holder.
Install the insulator [1] in the pump cover.
5-94
2.1 N·m (0.21 kgf·m, 1.5 lbf·ft)
[4]
[2]
[3]
[2]
[1]
[4]
[3]
[1]
[1]