Maintaining Bfd; Clearing Bfd Statistics; Debugging Bfd - Huawei Quidway S3700 Series Configuration Manual
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Prerequisite
The configurations of the interval at which trap messages are sent are complete.
Procedure
l
----End
Example
Run the display current-configuration configuration bfd command, and you can view that
the interval at which trap messages are sent is 300 seconds.
<Quidway> display current-configuration configuration bfd
#
bfd
snmp-agent bfd trap-interval 300
#
return
6.8 Maintaining BFD
This section describes how to maintain BFD by deleting BFD statistics, and monitoring BFD
operation.
6.8.1 Clearing BFD Statistics
Deleting previous BFD statistics is recommended before BFD statistics within a specified period
of time are collected.
Context
BFD statistics cannot be restored after being deleted. Exercise caution when using the command.
Procedure
Step 1 Run the reset bfd statistics { all | discriminator discr-value } command in the user view to
delete BFD statistics.
----End
6.8.2 Debugging BFD
Debugging is used to troubleshoot BFD performance problems.
Issue 01 (2011-10-26)
Run the display current-configuration configuration bfd command to view the
configuration of the BFD trap function.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 BFD Configuration
302
Advertisement
Table of Contents
