Huawei Quidway S3700 Series Configuration Manual page 152
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
secondary-port ethernet 0/0/2 level 0
[UPEB-rrpp-domain-region2] ring 1 enable
[UPEB-rrpp-domain-region2] quit
l Configure UPE C.
# Configure UPE C as a transit node of ring 1 in domain 1 and specify primary and secondary
ports on UPE C.
[UPEC] rrpp domain 1
[UPEC-rrpp-domain-region1] ring 1 node-mode transit primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[UPEC-rrpp-domain-region1] ring 1 enable
[UPEC-rrpp-domain-region1] quit
# Configure UPE C as a transit node of ring 1 in domain 2 and specify primary and secondary
ports on UPE C.
[UPEC] rrpp domain 2
[UPEC-rrpp-domain-region2] ring 1 node-mode transit primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[UPEC-rrpp-domain-region2] ring 1 enable
[UPEC-rrpp-domain-region2] quit
l Configure UPE D.
# Configure UPE D as the master node of ring 1 in domain 1. Configure Eth 0/0/1 as the primary
port and Eth 0/0/2 as the secondary port.
[UPED] rrpp domain 1
[UPED-rrpp-domain-region1] ring 1 node-mode master primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[UPED-rrpp-domain-region1] ring 1 enable
[UPED-rrpp-domain-region1] quit
# Configure UPE D as the master node of ring 1 in domain 2. Configure Eth 0/0/2 as the primary
port and Eth 0/0/1 as the secondary port.
[UPED] rrpp domain 2
[UPED-rrpp-domain-region2] ring 1 node-mode master primary-port ethernet 0/0/2
secondary-port ethernet 0/0/1 level 0
[UPED-rrpp-domain-region2] ring 1 enable
[UPED-rrpp-domain-region2] quit
# Configure UPE D as a transit node of ring 1 in domain 3 and specify primary and secondary
ports on UPE D.
[UPED] rrpp domain 3
[UPED-rrpp-domain-region3] ring 1 node-mode transit primary-port ethernet 0/0/2
secondary-port ethernet 0/0/4 level 0
[UPED-rrpp-domain-region3] ring 1 enable
[UPED-rrpp-domain-region3] quit
l Configure UPE E.
# Configure UPE E as a transit node of ring 1 in domain 3 and specify primary and secondary
ports on UPE E.
[UPEE] rrpp domain 3
[UPEE-rrpp-domain-region3] ring 1 node-mode transit primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[UPEE-rrpp-domain-region3] ring 1 enable
[UPEE-rrpp-domain-region3] quit
l Configure UPE F.
# Configure UPE F as the master node of ring 1 in domain 3. Configure Eth 0/0/1 as the primary
port and Eth 0/0/2 as the secondary port.
Issue 01 (2011-10-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
140
Advertisement
Table of Contents
