Huawei Quidway S3700 Series Configuration Manual page 135

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Step 7 Set the link-Up timer.
l Configure CE1.
l Configure CE2.
l Configure PE-AGG.
Step 8 Verify the configuration.
After the preceding configurations are complete and the network topology becomes stable,
perform the following operations to verify the configuration. Here, UPE B and PE-AGG are
used as examples.
l Run the display rrpp brief command on UPE B. The following information is displayed.
Issue 01 (2011-10-26)
[UPEB-rrpp-ring-group1] domain 2 ring 2 to 3
[UPEB-rrpp-ring-group1] quit
# Set the link-Up timer to 1 second.
[CE1] rrpp linkup-delay-timer 1
# Set the link-Up timer to 1 second.
[CE2] rrpp linkup-delay-timer 1
# Set the link-Up timer to 1 second.
[PE-AGG] rrpp linkup-delay-timer 1
[UPEB] display rrpp brief
Abbreviations for Switch Node Mode :
M - Master , T - Transit , E - Edge , A - Assistant-Edge
RRPP Protocol Status:
RRPP Working Mode: HW
RRPP Linkup Delay Timer: 0 sec(default is 0 sec)
Number of RRPP Domains: 2
Domain Index : 1
Control VLAN : major 5
Protected VLAN : Reference Instance 1
Hello Timer : 1 sec(default is 1 sec)
Ring Ring Node
ID Level Mode
Enabled
-------------------------------------------------------------------------------
--
1 0 T
2 1 E
3 1 E
Domain Index : 2
Control VLAN : major 10
Protected VLAN: Reference Instance 2
Hello Timer : 1 sec(default is 1 sec)
Ring Ring Node
ID Level Mode
Enabled
-------------------------------------------------------------------------------
--
1 0 T
2 1 E
3 1 E
You can see that the RRPP protocol is enabled on UPE B.
In domain 1:
VLAN 5 is the control VLAN and VLANs mapping instance 1 are the protected VLANs.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Enable
sub 6
Fail Timer : 6 sec(default is 6 sec)
Primary/Common
Port
Ethernet0/0/1
Ethernet0/0/1
Ethernet0/0/1
sub 11
Fail Timer : 6 sec(default is 6 sec)
Primary/Common
Port
Ethernet0/0/1
Ethernet0/0/1
Ethernet0/0/1
3 RRPP Configuration
Secondary/Edge
Port
Ethernet0/0/2
Ethernet0/0/3
Ethernet0/0/4
Secondary/Edge
Port
Ethernet0/0/2
Ethernet0/0/3
Ethernet0/0/4
Is
Yes
Yes
Yes
Is
Yes
Yes
Yes
123