Huawei Quidway S3700 Series Configuration Manual page 223

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Figure 4-12 Networking diagram for configuring EFM OAM
Configuration Roadmap
The configuration roadmap is as follows:
1.
2.
3.
4.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
Procedure
Step 1 Enable EFM OAM globally.
# Enable EFM OAM globally on Switch A.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] efm enable
# Enable EFM OAM globally on Switch B.
<Quidway> system-view
[Quidway] sysname SwitchB
[SwitchB] efm enable
Step 2 Configure EFM OAM on Eth 0/0/1 of Switch A to work in passive mode.
Issue 01 (2011-10-26)
SwitchA
Ethernet0/0/1
User
network
Ethernet0/0/1
Enable EFM OAM globally on Switch A and Switch B.
Configure EFM OAM on Eth 0/0/1 of Switch A to work in passive mode.
Enable EFM OAM on Eth 0/0/1 on Switch B. Enable EFM OAM on Eth 0/0/1 on Switch
A.
Configure Eth 0/0/1 of Switch B to detect the errored frames, errored codes, and errored
frame seconds.
Period for detecting errored frames on Eth 0/0/1 of Switch B (5 seconds) and threshold of
number of errored frames (5)
Period for detecting errored codes on Eth 0/0/1 of Switch B (5 seconds) and threshold of
number of errored codes (5)
Period for detecting errored frame seconds on Eth 0/0/1 of Switch B (120 seconds) and
threshold of number of errored frame seconds (5)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SwitchB
Internet
4 Ethernet OAM Configuration
211