Maintaining Dldp; Clearing The Statistics Of Dldp - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
Procedure
Step 1 Run the display dldp [ interface interface-type interface-number ] command to check the DLDP
configuration and neighbor entries.
----End
Example
Run the display dldp command, and you can view the status of an interface after the DLDP
status is reset.
<Quidway> display dldp
DLDP global status : enable
DLDP interval : 5s
DLDP work-mode : enhance
DLDP authentication-mode : simple, password is 123
DLDP unidirectional-shutdown : auto
DLDP delaydown-timer : 2s
The number of enabled ports is 2.
The number of global neighbors is: 2.
Interface Ethernet0/0/1
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.
Interface Ethernet0/0/2
DLDP port state : advertisement
DLDP link state : up
The neighbor number of the port is 1.

1.4 Maintaining DLDP

This section describes how to maintain DLDP.

1.4.1 Clearing the Statistics of DLDP

Context
Statistics of DLDP cannot be restored after you clear them. So, confirm the action before you
use the command.
Issue 01 (2011-10-26)
Neighbor mac address : 0000-0000-0100
Neighbor port index : 21
Neighbor state : two way
Neighbor aged time : 13
Neighbor mac address : 0000-0000-1100
Neighbor port index : 22
Neighbor state : two way
Neighbor aged time : 12
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 DLDP Configuration
11