Huawei Quidway S3700 Series Configuration Manual page 261

Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
3.
4.
5.
6.
Data Preparation
To complete the configuration, you need the following data:
l
l
l
l
Procedure
Step 1 Create instances.
l Configure UPEA.
l Configure UPEB.
l Configure UPEC.
Issue 01 (2011-10-26)
Configure protected VLAN and control VLAN for domain 1.
Configure PE-AGG as the master node and configure UPEA, UPEB, and UPE C as transit
nodes on ring 1 in domain 1.
Configure Ethernet CFM on PE-AGG and UPEA to detect faults on the two links between
PE-AGG and UPEA.
Configure association between Ethernet CFM and primary and secondary interfaces on the
RRPP ring on PE-AGG.
IDs of instances
Range of the protected VLANs
IDs of the control VLANs
Numbers of the RRPP interfaces
# Create data VLANs 100 to 300 on UPEA.
<Quidway> system-view
[Quidway] sysname UPEA
[UPEA] vlan batch 100 to 300
# Create instance 1, and map control VLANs 5 and 6 and data VLANs 100 to 200 in domain
1 to instance 1.
[UPEA] stp region-configuration
[UPEA-mst-region] instance 1 vlan 5 6 100 to 300
# Activate the configuration.
[UPEA-mst-region] active region-configuration
[UPEA-mst-region] quit
# Create data VLANs 100 to 300 on UPEB.
<Quidway> system-view
[Quidway] sysname UPEB
[UPEB] vlan batch 100 to 300
# Create instance 1, and map control VLANs 5 and 6 and data VLANs 100 to 300 in domain
1 to instance 1.
[UPEB] stp region-configuration
[UPEB-mst-region] instance 1 vlan 5 6 100 to 300
# Activate the configuration.
[UPEB-mst-region] active region-configuration
[UPEB-mst-region] quit
# Create data VLANs 100 to 300 on UPEC.
<Quidway> system-view
[Quidway] sysname UPEC
[UPEC] vlan batch 100 to 300
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Ethernet OAM Configuration
249