Huawei Quidway S3700 Series Configuration Manual page 104
Hide thumbs
Also See for Quidway S3700 Series:
- Configuration manual (289 pages) ,
- Quick start manual (70 pages) ,
- Manual (69 pages)
Table of Contents
Advertisement
Quidway S3700 Series Ethernet Switches
Configuration Guide - Reliability
[SwitchA-Ethernet0/0/2] stp disable
[SwitchA-Ethernet0/0/2] quit
# Disable STP on the interfaces to be added to the RRPP ring on Switch B.
[SwitchB] interface ethernet 0/0/1
[SwitchB-Ethernet0/0/1] stp disable
[SwitchB-Ethernet0/0/1] quit
[SwitchB] interface ethernet 0/0/2
[SwitchB-Ethernet0/0/2] stp disable
[SwitchB-Ethernet0/0/2] quit
# Disable STP on the interfaces to be added to the RRPP ring on Switch C.
[SwitchC] interface ethernet 0/0/1
[SwitchC-Ethernet0/0/1] stp disable
[SwitchC-Ethernet0/0/1] quit
[SwitchC] interface ethernet 0/0/2
[SwitchC-Ethernet0/0/2] stp disable
[SwitchC-Ethernet0/0/2] quit
[SwitchC] interface ethernet 0/0/3
[SwitchC-Ethernet0/0/1] stp disable
[SwitchC-Ethernet0/0/1] quit
[SwitchC] interface ethernet 0/0/4
[SwitchC-Ethernet0/0/2] stp disable
[SwitchC-Ethernet0/0/2] quit
# Disable STP on the interfaces to be added to the RRPP ring on Switch E.
[SwitchE] interface ethernet 0/0/1
[SwitchE-Ethernet0/0/1] stp disable
[SwitchE-Ethernet0/0/1] quit
[SwitchE] interface ethernet 0/0/2
[SwitchE-Ethernet0/0/2] stp disable
[SwitchE-Ethernet0/0/2] quit
# Disable STP on the interfaces to be added to the RRPP ring on Switch D.
[SwitchD] interface ethernet 0/0/1
[SwitchD-Ethernet0/0/1] stp disable
[SwitchD-Ethernet0/0/1] quit
[SwitchD] interface ethernet 0/0/2
[SwitchD-Ethernet0/0/2] stp disable
[SwitchD-Ethernet0/0/2] quit
Step 5 Create RRPP rings.
Configure nodes on ring 2. The configuration procedure is as follows:
# Configure Switch A as the master node of ring 2 and specify the primary and secondary
interfaces.
[SwitchA] rrpp domain 2
[SwitchA-rrpp-domain-region2] ring 2 node-mode master primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[SwitchA-rrpp-domain-region2] ring 2 enable
[SwitchA-rrpp-domain-region2] quit
# Configure SwitchB as a transit node of ring 2 (major ring) and specify the primary and
secondary interfaces.
[SwitchB] rrpp domain 2
[SwitchB-rrpp-domain-region2] ring 2 node-mode transit primary-port ethernet 0/0/1
secondary-port ethernet 0/0/2 level 0
[SwitchB-rrpp-domain-region2] ring 2 enable
[SwitchB-rrpp-domain-region2] quit
# Configure Switch C as a transit node of RRPP ring 2 and specify the primary and secondary
interfaces.
Issue 01 (2011-10-26)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 RRPP Configuration
92
Advertisement
Table of Contents
